|
CXCE series electrical
connector, high reliable, miniature circular, wire spring
Description
Depended on the insert arrangement of CXC series, the series is
smaller and lighter than CXC series under the same contact number,
at the same time, keeping same electrical performance, decreasing
the insert gap. The insert density of this series is equal with
MIL-C-26482 I series.
* Quickly bayonet coupling easy to operate, reliable connection,
anti-vibration and shock
*5 keys for blind coupling and anti-mismating
* five key location for avoiding mismating of connectors with
similar exterior
* high reliable wire spring socket provide soft insert &
withdrawal force and low contact resistance
*termination: solder
*Plug and receptacle can be inserted with pin and socket.
Main performance
1. Mechanical
--Shell high strength aluminum alloy
--Shield plating: iridescence zinc plating or olive green passive,
electroless nickel plating
--Non-shield plating: black anodize
--Insulator: thermoset material
--Insert and seal grommet: silicon rubber
Contact
--Material: copper alloy, plating: silver plating, gold plating
--Duration:1000 cycles of mating and unmating
2. Electrical
Contact resistance and current rating
|
Contact
size mm
|
Contact
resistancemΩ
|
Current
rating A
|
Inner
diameter of solder cup mm
|
|
Ф1.0
|
5
|
5
|
Ф1.3
|
|
Ф1.5
|
2.5
|
10
|
Ф1.8
|
|
Ф2.0
|
1.25
|
20
|
Ф2.5
|
|
Ф3.0
|
0.75
|
40
|
Ф3.4
|
--Voltage rating, withstanding voltage and insulating resistance
|
Operating
environment
|
Voltage
ratingV
|
Withstanding
voltageV
|
Insulating
resistance: MΩ
|
|
Normal
|
500
|
≥1500
|
≥5000
|
|
Heat
and damp
|
500
|
≥1125
|
≥100
|
|
Low
pressure(1KPa)
|
250
|
≥300
|
----
|
--Electrical continuity between shells
Aluminum alloy shell<2.5mΩ
3.Environmental
Operating temperature:-55-+200C
Relative humidity: 95% at 40C
Operating height: 30000m
Vibration: frequency:10-2000H, acceleration:147m/s2
Shock: acceleration:490m/s2
Constant acceleration:490m/s2
Withstanding humidity, salty, , rain, dust.
Order information
|
Series
|
|
|
XCE
|
14 |
T |
4 |
K |
P |
（W） |
| |
CXCE
-solder electrical connector with wire spring socket
|
| Shell size |
| |
12-14-18-22-24-27-30-33-36
|
| Shell |
|
|
| |
T |
Plug |
| |
F |
square
flange |
| |
S |
two-end
sealed receptacle
|
|
| Contact
number:1-62 |
| Contact |
|
|
|
|
| |
Z |
pin with silver plating |
Z1 |
pin with gold plating |
| |
K |
socket with
silver plating |
K1 |
socket with
gold plating |
|
| Shell plating and accessory |
| |
E |
screw,
accessory, anodize coating
|
| |
P |
screw, accessory,
iridescence passive zinc plating |
| |
P1 |
screw,
accessory, electroless nickel plating |
| |
P3 |
screw,
accessory, olive green passive zinc plating |
|
| Key |
| |
N key-blank, W key-(W) X key-(X) Y key-(Y) Z key-(Z)
|
|
Note
1. The part number of electrical connector is expressed with the
form of fraction. The mark of receptacle is numerator and the mark
of plug is written as denominator, with a solidus to separate them.
(only show housing plating and accessory)
2. The part numbers of plug and receptacle are directly printed on
itself. The series of electric connector just for the order and
producing process and management.
3. One side of CXCE-S-M two-end sealed receptacle is inserted with
pins. The other is inserted with sockets. The part number of plug
with pin is written in the front and the other plug with socket in
the back, separating with a symbol of “.”.
4.If use the accessory, add a symbol of “+” at the end of the
part number, then write the symbol of accessory you need.
Example
* CXCE14 square flange receptacle inserted silver plating sockets, 4
pairs of contacts, shield, iridescence passive zinc plating, N key;
the type name should be XCE14F4KP
* CXCe14 receptacle inserted silver plating pins, 4 pairs of
contacts, shield, iridescence passive zinc plating, N key; the type
name should be XCE14T4ZP
* Electric connector type: XCE14F4KP/P
|
|
